1. Hand Clinchers>>

button-print-gry20

HANSON HAND CLINCHERSare designed to clinch tubular rivets and the HT-100 can be used to set tubular and solid rivets using ourSQUEEZER DIES. These tools are operated by slight hammer blows to the top of the tool or they can be adapted to an arbor press or drill press.

hand-rivet-clinchers

Click part numbers for pricing or to buy

PART
NUMBER		 RIVET
DIAMETER		 CLINCH
TYPE		 LENGTH
“L”		 DIAMETER
“A”
S-959 .029 ROLL 3” 1/4”
S-1154 .040 ROLL 3” 1/4”
HT-350 1/16 ROLL 3-1/2” 5/16”
HT-180 .087 ROLL 4-1/4” 3/8”
HT-366
HT-552		 .097
.109		 ROLL 4-1/4”
5″		 3/8”
1/2″
HT-174 1/8 ROLL 4-1/4” 3/8”
HT-174-WR 1/8 WIDE ROLL 4-1/4” 3/8”
HT-175 9/64 ROLL 5” 1/2”
HT-178 5/32 ROLL 5” 1/2”
HT-171 3/16 ROLL 5” 1/2”
HT-179 7/32 ROLL 5” 1/2”
HT-176 1/4 ROLL 5” 1/2”
HT-151 5/16 ROLL 5” 5/8”
S-822 3/8 ROLL 5” 5/8”
S-1634 7/16 ROLL 5” 7/8”
T-1177 1/2 ROLL 6” 7/8”
T-147 9/64 STAR 5” 1/2”
T-240 3/16 STAR 5” 1/2”
T-241 1/4 STAR 4” 5/8”
HT-100 Hole in end to accept anySQUEEZER DIEwith a
3/16” diameter shank.		 5” 1/2”