HANSON CLAMPS
HANSON CLAMPSHanson Clamps are a temporary fastener used to hold sheets and components together during riveting. They are typically installed every other hole. Rivets are installed in the remaining holes then clamps are removed.
| PART NUMBER |
COLOR CODE |
GRIP RANGE |
DIAMETER “D” |
DRILL SIZE |
|---|---|---|---|---|
| HC-24 HC-34 HC-44 HC-54 HC-64 HC-84 |
Black Zinc Copper Black Brass Copper |
0 to 1/4” | 1/16” 3/32” 1/8” 5/32” 3/16” 1/4” |
51 40 30 20 11 F |
| HC-38 HC-48 HC-58 HC-68 HC-88 |
Zinc Copper Black Brass Copper |
0 to 1/2” | 3/32” 1/8” 5/32” 3/16” 1/4” |
40 30 20 11 F |
| HC-312 HC-412 HC-512 HC-612 |
Zinc Copper Black Brass |
1/2” to 3/4” | 3/32” 1/8” 5/32” 3/16” |
40 30 20 11 |
HANSON CLAMP PLIERS
HANSON CLAMP PLIERS are designed for fast, one handed in-stallation, and removal of all sizes of temporary clamps. They are constructed of heavy-duty forged steel for many years of use.
PART NUMBER: HCP1
撕开TING TAPE
HANSON RIVETING TAPE is used for hand installation of multiple rivets in an assembly.
Riveting tape is placed over the heads of rivets in an assembly to hold them in place during
riveting. After the rivets are up-set, the tape is removed leaving no adhesive on rivet heads
or components. This tape is thin and fl exible enough to eliminate any confl ict with tooling.
Riveting tape is a tough polyester fi lm with colored adhesive coating on the outside edges.
The center section is clear and uncoated for ease of visibility of rivets and to eliminate the
possibility of transferring adhesive to rivet heads during riveting.
Toll Free: 1-800-RRRIVET
