Copper Belt Rivets are typically used in leather work. The burr is placed over the end of the rivet shank then the end of the rivet is peened with a hammer locking the bur in place.
Rivets and Burrs are sold separately.
COPPER BELT RIVETS | COPPER BURRS | |||||||||
PART NUMBER |
SIZE | BODY DIAMETER Under Head |
BODY DIAMETER Tip of Shank |
LENGTH OVER ALL |
HEAD DIAMETER (Nominal) |
HEAD HEIGHT (Nominal) |
PART NUMBER |
INSIDE DIAMETER |
OUTSIDE DIAMETER |
|
---|---|---|---|---|---|---|---|---|---|---|
“A” | “D” | “L” | “B” | “C” | “ID” | “OD” | ||||
CBR0806 CBR0808 CBR0810 CBR0812 |
#8 x 3/8 #8 x 1/2 #8 x 5/8 #8 x 3/4 |
.181 | .155 | .375 .500 .625 .750 |
.500 | .063 | WC-1015 | .165 | .475 | |
CBR0906 CBR0908 CBR0910 CBR0912 |
#9 x 3/8 #9 x 1/2 #9 x 5/8 #9 x 3/4 |
.161 | .135 | .375 .500 .625 .750 |
.468 | .058 | WC-0914 | .145 | .440 | |
CBR1006 CBR1008 CBR1010 CBR1012 |
#10 x 3/8 #10 x 1/2 #10 x 5/8 #10 x 3/4 |
.151 | .130 | .375 .500 .625 .750 |
.437 | .055 | WC-0813 |
.135 | .405 | |
CBR1206 CBR1208 CBR1210 CBR1212 |
#12 x 3/8 #12 x 1/2 #12 x 5/8 #12 x 3/4 |
.137 | .120 | .375 .500 .625 .75 |
.375 | .045 | WC-0812 | .125 | .365 |