STAINLESS RIVET / STAINLESS MANDREL

Q Rivetsoffer greater shear and tensile strength. The mandrel is designed to effect a weather-resistant seal when installed properly and provide good vibration resistance.

注意:每个芯铆钉头当充裕n in the Mid-Grip Range (except -04-01’s which break at .062)

RIVET MATERIAL MANDREL MATERIAL	HEAD STYLE	PART NUMBER	Avdel®	BODY DIAMETER (NOM.)	WORK HOLE & DRILL SIZE	GRIP RANGE (SEE NOTE ABOVE) “G”			BODY LENGTH (MAX.)	HEAD DIAMETER (NOM.)	HEAD HEIGHT (MAX.)	TYPICAL ULTIMATE STRENGTHS IN LBS. (SEE NOTE)
				“A”	“H”	MIN	MID*	MAX	“L”	“B”	“C”	SHEAR	TENSILE
OTHER COLORS AND FINISHES AVAILABLE	PROTRUDING HEAD	QTTD401 QTTD402 QTTD403 QTTD404 QTTD405 QTTD406	CCPQ-04-01 CCPQ-04-02 CCPQ-04-03 CCPQ-04-04 CCPQ-04-05 CCPQ-04-06	.125 1/8	.129/.133 #30	– .063 .094 .126 .188 .251	– .093 .125 .187 .250 .312	.062 .125 .187 .250 .312 .375	.212 .275 .337 .400 .462 .535	.250	.042	700	600
		QTTD502 QTTD504 QTTD506	CCPQ-05-02 CCPQ-05-04 CCPQ-05-06	.156 5/32	.160/.164 #20	.062 .126 .251	.093 .187 .312	.125 .250 .375	.300 .425 .550	.312	.050	1050	1000
		QTTD602 QTTD604 QTTD606 QTTD608	CCPQ-06-02 CCPQ-06-04 CCPQ-06-06 CCPQ-06-08	.187 3/16	.192/.196 #11	.062 .126 .251 .376	.093 .187 .312 .437	.125 .250 .375 .500	.325 .450 .575 .700	.375	.060	1650	1300
		QTTD802 QTTD804 QTTD806 QTTD808 QTTD810	CCPQ-08-02 CCPQ-08-04 CCPQ-08-06 CCPQ-08-08 CCPQ-08-10	.250 1/4	.257/.261 F	.062 .126 .251 .376 .501	.093 .187 .312 .437 .562	.125 .250 .375 .500 .625	.375 .500 .625 .750 .900	.500	.080	2450	2250
	LARGE FLANGE	QTTL402 QTTL404 QTTL406	CCLQ-04-02 CCLQ-04-04 CCLQ-04-06	.125 1/8	.129/.133 #30	.063 .126 .251	.093 .187 .312	.125 .250 .375	.337 .400 .462	.375	.065	700	600
		QTTL504 QTTL506	CCLQ-05-04 CCLQ-05-06	.156 5/32	.160/.164 #20	.126 .251	.187 .312	.250 .375	.425 .550	.469	.075	1050	1000
		QTTL604 QTTL606 QTTL608	CCLQ-06-04 CCLQ-06-06 CCLQ-06-08	.187 3/16	.192/.196 #11	.126 .251 .376	.187 .312 .437	.250 .375 .500	.325 .450 .575	.625	.092	1650	1300
	120° COUNTERSUNK	QTTK403 QTTK404 QTTK405 QTTK406	CCCQ-04-03 CCCQ-04-04 CCCQ-04-05 CCCQ-04-06	.125 1/8	.129/.133 #30	.094 .126 .188 .251	.125 .187 .250 .312	.187 .250 .312 .375	.337 .400 .462 .535	.226	.032	700	600
		QTTK504 QTTK506	CCCQ-05-04 CCCQ-05-06	.156 5/32	.160/.164 #20	.126 .251	.187 .312	.250 .375	.425 .550	.281	.040	1050	1000
		QTTK604 QTTK606 QTTK608	CCCQ-06-04 CCCQ-06-06 CCCQ-06-08	.187 3/16	.192/.196 #11	.126 .251 .376	.187 .312 .437	.250 .375 .500	.450 .575 .700	.344	.050	1650	1300
		QTTK804 QTTK806 QTTK808 QTTK810	CCCQ-08-04 CCCQ-08-06 CCCQ-08-08 CCCQ-08-10	.250 1/4	.257/.261 F	.126 .251 .376 .501	.187 .312 .437 .562	.250 .375 .500 .625	.500 .625 .750 .900	.468	.071	2450	2250

NOTE: Values for typical ultimate strengths are a guide only and may vary greatly depending upon the application.