HR RIVETS® offer high strength with a large blind-side footprint for use in thin sheet or brittle material applications. High clamp-up and excellent mandrel retention ensures a vibration resistant joint.
HR RIVETS®
A SPECIAL NOSEPIECE AND JAW PUSHERARE REQUIREDFOR INSTALLATION OF THESE RIVETS
| RIVET MATERIAL MANDREL MATERIAL |
HEAD STYLE |
PART NUMBER |
BODY DIAMETER |
WORK HOLE AND DRILL SIZE |
GRIP RANGE |
BODY LENGTH (MAX.) |
HEAD DIAMETER |
HEAD HEIGHT |
TYPICAL ULTIMATE STRENGTHS IN LBS. (SEE NOTE) |
|
|---|---|---|---|---|---|---|---|---|---|---|
| “A” | “H” | “G” | “L” | “B” | “C” | SHEAR | TENSILE | |||
|
DOME |
SD42HR SD43HR SD44HR |
.124/.132 | .133/.141 | .036-.125 .125-.187 .187-.250 |
.315 .378 .440 |
.240/.263 | .039/.051 | 325 | 382 |
| SD52HR SD53HR SD54HR |
.155/.164 | .165/.173 | .063-.125 .125-.187 .187-.250 |
.354 .417 .480 |
.303/.326 | .055/.066 | 449 | 584 | ||
| SD62HR SD63HR SD64HR SD65HR |
.187/.195 | .196/.212 | .063-.125 .125-.187 .187-.250 .250-.312 |
.362 .425 .488 .551 |
.362/.396 | .066/.082 | 696 | 764 | ||
| SD83HR SD85HR |
.250/.259 | .250/.258 | .047-.187 .187-.312 |
.444 .570 |
.492/.531 | .090/.106 | 876 | 1202 | ||
LARGE |
SD62HRLF SD63HRLF SD64HRLF SD65HRLF |
.187/.195 | .196/.212 | .063-125 .125-.187 .187-.250 .250-.312 |
.362 .425 .488 .551 |
.606/.645 | .070/.086 | 696 | 764 | |
| SD83HRLF SD85HRLF |
.250/.259 | .250/.258 | .047-.187 .187-.312 |
.444 .570 |
.610/.649 | .110/.126 | 876 | 1202 | ||
120° |
SK42HR SK43HR SK44HR |
.124/.132 | .133/.138 | .078-.125 .125-.187 .187-.250 |
.315 .378 .440 |
.196/.220 | .023/.039 | 213 | 269 | |
| SH52HR SK54HR SK56HR |
.155/.164 | .165/.169 | .078-.125 .125-.187 .187-.250 |
.354 .417 .480 |
.240/.263 | .031/.047 | 292 | 449 | ||
| SK63HR SK64HR |
.187/.195 | .196/.205 | .093-.187 .187-.250 |
.425 .488 |
.307/.338 | .043/.059 | 696 | 764 | ||
|
DOME |
SSD42SSHR SSD43SSHR SSD44SSHR |
.124/.132 | .134/.142 | .063-.126 .126-.189 .189-.252 |
.315 .378 .441 |
.240/.264 | .039/.051 | 427 | 562 |
| SSD52SSHR SSD53SSHR SSD54SSHR |
.155/.164 | .165/.173 | .063-.126 .126-.189 .189-.252 |
.354 .417 .480 |
.303/.327 | .055/.066 | 630 | 855 | ||
| SSD62SSHR SSD63SSHR SSD64SSHR |
.187/.195 | .196/.212 | .063-.125 .125-.187 .187-.250 |
.362 .425 .488 |
.362/.396 | .066/.082 | 1056 | 1124 | ||
120° |
SSK42SSHR SSK43SSHR SSK44SSHR |
.124/.132 | .134/.142 | .079-.125 .126-.189 .189-.252 |
.441 .504 .567 |
.196/.200 | .023/.039 | 315 | 450 | |
| SSK63SSHR SSK64SSHR |
.187/.195 | .196/.205 | .094-.187 .187-.250 |
.425 .488 |
.307/.388 | .043/.059 | 831 | 1124 | ||
注:值是一个典型的终极优势guide only and may vary greatly depending upon the application.
Hemlok® Rivetsoffer high strength with a large blind-side footprint for use in thin sheet or brittle material applications. The mandrel has a mechanical lock and breaks close to flush with the rivet head.
Both Avibulb® and Avinox II® Rivetsoffer high strength with a large blind-side footprint for use in thin sheet or brittle material applications. High clamp-up and positive mandrel retention ensures a vibration resistant joint.
HEMLOK® STRUCTURAL RIVETS
| RIVET MATERIAL MANDREL MATERIAL |
HEAD STYLE |
PART NUMBER |
BODY DIAMETER |
WORK HOLE DIAMETER |
GRIP RANGE |
BODY LENGTH (MAX.) |
HEAD DIAMETER (NOM.) |
HEAD HEIGHT (MAX.) |
TYPICAL ULTIMATE STRENGTHS IN LBS. (SEE NOTE) |
|
|---|---|---|---|---|---|---|---|---|---|---|
| “A” | “H” | “G” | “L” | “B” | “C” | SHEAR | TENSILE | |||
STEEL RIVET |
PROTRUDING |
2221-0812 2221-0813 2221-0814 2221-0815 2221-0817 2221-0818 2221-0819 2221-0821 |
.254/.258 | .264/.272 | .068-.138 .110-.189 .132-.211 .189-.268 .268-.346 .295-.374 .346-.425 .425-.504 |
.488-.539 .539-.590 .561-.612 .618-.669 .696-.747 .724-.775 .775-.826 .854-.905 |
.515 | .105 | 3820 | 2090 |
| ALUMINUM RIVET ALUMINUM MANDREL |
PROTRUDING |
2241-0812 2241-0813 2241-0814 2241-0815 2241-0817 2241-0818 2241-0819 2241-0821 |
.254/.258 | .264/.272 | .068-.138 .110-.189 .132-.211 .189-.268 .268-.346 .295-.374 .346-.425 .425-.504 |
.488-.539 .539-.590 .561-.612 .618-.669 .696-.747 .724-.775 .775-.826 .854-.905 |
.515 | .105 | 1500 | 700 |
AVIBULB®RIVETS
| RIVET MATERIAL MANDREL MATERIAL |
HEAD STYLE |
PART NUMBER |
BODY DIAMETER |
WORK HOLE DIAMETER |
GRIP RANGE |
BODY LENGTH (MAX.) |
HEAD DIAMETER (NOM.) |
HEAD HEIGHT (MAX.) |
TYPICAL ULTIMATE STRENGTHS IN LBS. (SEE NOTE) |
||
|---|---|---|---|---|---|---|---|---|---|---|---|
| SHEAR | TENSILE | ||||||||||
| “A” | “H” | “G” | “L” | “B” | “C” | 茎内 SHEAR PLANE |
STEM OUTSIDE SHEAR PLANE |
||||
STEEL RIVET |
LO-PROFILE |
0 bn01 - 0408 0BN01-0411 0BN01-0414 |
.122/.130 | .130/.134 | .039-.118 .118-.197 .197-.276 |
.343 .445 .535 |
.248 | .055 | 270 393 562 |
N/A | 310 |
| 0BN01-0509 0BN01-0512 0BN01-0516 |
.153/.160 | .161/.169 | .039-.118 .118-.197 .197-.276 |
.400 .480 .600 |
.303 | .059 | 539 787 921 |
416 | 629 | ||
| 0BN01-00611 0BN01-00614 0BN01-00618 |
.185/.192 | .193/.201 | .059-.138 .138-.236 .236-.335 |
.480 .580 .700 |
.366 | .059 | 809 944 1258 |
742 | 854 | ||
注:值是一个典型的终极优势guide only and may vary greatly depending upon the application.
AVINOX II®RIVETS
| RIVET MATERIAL MANDREL MATERIAL |
HEAD STYLE |
PART NUMBER |
BODY DIAMETER |
WORK HOLE DIAMETER |
GRIP RANGE |
BODY LENGTH (MAX.) |
HEAD DIAMETER (NOM.) |
HEAD HEIGHT (MAX.) |
TYPICAL ULTIMATE STRENGTHS IN LBS. (SEE NOTE) |
||
|---|---|---|---|---|---|---|---|---|---|---|---|
| SHEAR | TENSILE | ||||||||||
| “A” | “H” | “G” | “L” | “B” | “C” | 茎内 SHEAR PLANE |
STEM OUTSIDE SHEAR PLANE |
||||
STAINLESS RIVET |
LO-PROFILE |
0BE61-00408 0BE61-00411 0BE61-00414 |
.122/.130 | .130/.134 | .039-.118 .118-.197 .197-.276 |
.350 .450 .540 |
.248 | .043 | 360 382 719 |
360 360 360 |
450 |
| 0BE61-00509 0BE61-00512 0BE61-00516 |
.153/.160 | .161/.169 | .039-.118 .118-.197 .197-.276 |
.400 .480 .600 |
.303 | .059 | 1169 | 629 | 899 | ||
| 0BE61-00611 0BE61-00614 0BE61-00618 |
.183/.191 | .193/.201 | .059-.138 .138-.236 .236-.335 |
.510 .610 .730 |
.366 | .059 | 1236 | 877 | 1124 | ||
注:值是一个典型的终极优势guide only and may vary greatly depending upon the application.
Toll Free: 1-800-RRRIVET
