1. Flush-Nuts>>

button-print-gry20

Hanson’s Flush-Nuts are a versatile Threaded Insert that can be installed in any thickness of material over .030″. Metal, plastic, fiberglass, or any rigid material will accept Flush-Nuts. During installation the base is drawn up into the upper sleeve swelling it in the work piece. After installation the head is virtually flush with the work.

Screen Shot 2016-01-21 at 3.43.26 PM

FLUSH-NUT

THREAD
SIZE		 STEEL ALUMINUM BODY
DIAMETER
(MAX)		 FLANGE
DIAMETER		 LENGTH WORK HOLE DIAMETER
FOR MATERIAL THICKNESS:
NO
KNURLS		 WITH
KNURLS		 NO
KNURLS		 WITH
KNURLS
“A” “B” “L” .030-.090 .091-.124 .125-.186 OVER .186

4-40

 TS440 TSK440 TA440 TAK440 .188 .211 .370 .188 .194 .194 .196

6/32

 TS632 TSK632 TA632 TAK632 .219 .240 .370 .219 .221 .228 .228

8-32

 TS832 TSK832 TA832 TAK832 .250 .269 .370 .250 .257 .266 .266

10-32

 TS1032 TSK1032 TA1032 TAK1032 .281 .306 .370 .281 .290 .290 .297

10-24

 TS1024 TSK1024 TA1024 TAK1024 .281 .306 .370 .281 .290 .290 .297

1/4-20

 TS2520 TSK2520 TA2520 TAK2520 .375 .400 .515 .375 .375 .386 .391

1/4-28

 TS2528 TSK2528 TA2528 TAK2528 .375 .400 .515 .750 .375 .386 .391

5/16-18

 TS51618 TSK51618 TA51618 TAK51618 .500 .528 .615 .500 .500 .516 .516

3/8-16

 TS3816 TSK3816 TA3816 TAK3816 .562 .588 .745 .562 .563 .578 .578

1/2-13

 TS5013 TSK5013 TA5013 TAK5013 .749 .800 .935 .750 .766 .781 .797

3.5MM

 TSM3.5 TSKM3.5 TAM3.5 TAKM3.5 .188 .211 .370 .187 .193 .193 .196

4MM

 TSM4 TSKM4 TAM4 TAKM4 .250 .269 .370 .250 .256 .265 .265

5MM

 TSM5 TSKM5 TAM5 TAKM5 .280 .306 .370 .281 .290 .291 .297

6MM

 TSM6 TSKM6 TAM6 TAKM6 .375 .400 .515 .375 .375 .386 .390

8MM

 TSM8 TSKM8 TAM8 TAKM8 .500 .528 .615 .500 .500 .515 .515

10MM

 TSM10 TSKM10 TAM10 TAKM10 .561 .588 .745 .562 .562 .578 .578

12MM

 TSM12 TSKM12 TAM12 TAKM12 .749 .800 .935 .750 .765 .781 .797