With standardPneumatic Installation PNEUMATIC RIVETING HAMMERS
Any small, lightweight pneumatic riveting hammer can be used in a production line for the installation of Southco Drive Rivets. Two or three blows of the bit are enough to drive the pin easily and quickly. Blind riveting in high production becomes a comparatively effortless operation.

Hammer installation With a hammer …
Just insert the rivet, hit the pin. One man, working from one side of the job sets rivets easily and quickly in blind or open applications. Once you drive the pin, the job is done. Sheets are pulled tightly together, and you get a smooth finished head without secondary operations.

Drive Rivets

1.DRILL A HOLE

RIVET
DIAMETER
1/8 5/32 3/16 1/4 5/16 3/8 1/2
DRILL SIZE 30 20 11 F P W .515
HOLE DIA. .128 .161 .191 .257 .323 .386

2. INSERT A RIVET

Seat head firmly against outer surface.
Drive Rivets

IN METAL

Drive Rivets

IN WOOD

3. HIT THE PIN

Drive pin flush with rivet head.
Drive Rivets

Expanding prongs
clinch sheets tightly,
eliminating gaps.

Drive Rivets

Metal and wood pulled tightly
together. Nothing protrudes
through wood.

USE SOUTHCO EASY-TO-INSTALL DRIVE RIVETS FOR BIG JOBS – LITTLE JOBSand everything in between

Drive Rivets

1.需要最大(或最小)drive rivets made? Hanson has them on the shelf. Plus plenty in between … from 1/8″ to 3/8″ diameter. Only Hanson stocks all of these sizes.

2. Hanson’s selection enables you to cope with numerous fastening problems involving tubes, extrusions, odd-shaped housings, and wood panels – thick or thin.

3. Drive riveting is fast – so fast that it’s often used in place of nuts and bolts. No special tools or power needed. Not even for 5/16″ or 3/8″ diameters. An ordinary hammer will drive a Southco rivet home.